Basic 70 – шкаф вытяжной, Labconco

Basic 70 – шкаф вытяжной, Labconco
Цена по запросу
Кат. №: 2246401
Производитель: Labconco

Без вентилятора, рабочая ширина 1632 мм, комплектуется химически стойкой эпоксидной рабочей поверхностью (# 4882804) и 2 стальными тумбами с дверцами (# 9900100), габариты (Ш×Г×В): 1830×762×2154-2185.

  • Product Subcategory: General Chemistry
  • Nominal Width: 6'
  • Region: International
  • Blower Requirements: Remote blower required
  • Conformance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CE, NFPA 45, SEFA 1, UL
  • Lighting: incandescent
  • Style: Benchtop

Basic Laboratory Hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Constructed of epoxy-coated steel, Basic Hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles. Choose from 4 and 6-foot widths.

Both standard and built-in blower models are available.

  • By-pass airflow design
  • Durable glacier white epoxy-coated 16 gauge steel exterior and interior resists chemical exposure.
  • Vapor-proof incandescent lights
  • Vertical-rising tempered safety glass sash
  • Adjustable two-piece baffle
  • Curved air foil
  • Blower and light switches (non-explosion-proof models)
  • Right side fixture panel factory-prepared to accept up to three service fixtures, one electrical duplex and one airflow monitor (kits sold separately)
  • Right interior wall factory-prepared for one cupsink and turret (cupsink and turret kit sold separately)
  • Epoxy-coated steel 10.31” OD exhaust connection
  • ETL listed (115 volt models)
  • CE conformity (230 volt models)
  • 4' and 6' widths
  • Versatile built-in blower that mounts on top of the hood liner, above the hood or at a remote location
  • Explosion-proof light and blower
  • International electrical configurations
  • Unassembled hoods
  • Remote Blowers (except Built-In Blower Models)
  • Ductwork
  • Base cabinets
  • Adjustable Height Base stands
  • Solid Epoxy Flat Work Surfaces
  • Service fixture kits
  • Electrical receptacle kits
  • Cupsink and turret kit
  • Airflow monitors
  • Sash stops
  • Fire extinguishers
  • Weight: 204.0 kg
  • Dimensions: 177.8 cm x 63.5 cm x 121.9 cm
  • Electrical: 208-230 volts, 50/60 Hz, 1 amp

Webinar on Managing Lab Air with Chemical Fume Hoods

Fume Hood Safety: Dos and DON

Fume Hoods Overview 2013

Поверхности рабочие
Химически стойкая эпоксидная рабочая поверхность (1830×760×30 мм)
Арт.: 4882804Производитель: Labconco

Размеры (Ш×Г×В), мм: 1830×760×30

по запросу
Стальная тумба с дверцами (914×559 мм)
Арт.: 9900100Производитель: Labconco

Размеры (ДxШ), мм: 914×559

Стальная тумба с дверцами (914×559 мм)
по запросу
С нами выгодно!
Гибкая ценовая политика!
Хотите уточнить условия сотрудничества?